Level One Tool Kit Option Items

This is a very normal quality pin vise from Bergeon with two reversible chucks and is good for the watchmaker who is not quite ready yet to get the great First-Quality Bergeon Pin Vise Set at this time. Pin Vise 5860 has opening from 0-2.1 on one end and 1.9-3 mm on the other and the lenght is 108 mm, about 4 inches.

BERG-5860
$18.95
 

Made for larger hands on both mechanical movements and chronograph quartz watches. Double sided, on one end the diameter of the hole is 0.80 mm and the other end is 1.50 mm. This tool is a lifesaver and a timesaver and will also help with hole sizes smaller and larger than the listed sizes.

FB-409
$15.80
 

This Presto is intended for removal of sweep seconds hands, but is excellent for the hour and minute hands of many wristwatches (as well as subsidiary hands like power reserve, date, etc). This is a very useful tool for most watchmakers and along with the Presto #1 (FB-400) and Bergeon 6016 (FB-410) is among my favorites. I use this Presto #6 more than any other hand remover.

FB-405
$37.20
 

Sized for most wristwatches, this tool provides twin blades that slip under the hub of the hand and a plunger on top that holds the hand once removed. As the sides of the tool are squeezed, the nylon blocks on the dial descend, push on the dial surface, and lift the hand straight off the pinion. I use this tool regularly. I thin down and polish the blades for use on small wristwatches so that they are as thin and smooth as possible. Always protect the dial when using this or any other hand-remover tool. The Presto #6 (FB-405) and Bergeon 6016 (FB-410) are two other very useful tools for wristwatches. If you're going to have only one hand remover for contemporary wristwatches, make it the Presto #6 (FB-405).

FB-400
$38.20
 

The dollar keeps falling and the price of this product keeps going up. I do not care if you cannot afford it! This is the spring bar tool to have. Mortgage your house if you have to and with some practice you will always get the job done with this tool! The FB-504 comes with one tip that is reversible in the handle: a small fork on one end and a pin on the other. The other tip is a large fork, which is the most useful end for removing spring bars quickly on leather straps. The large folk end is just about the only tool which will remove the bars on Seiko rubber divers bands. Order an extra set of replacement tips and use the large fork in one end of the handle and the pin pusher in the other end. The small fork grabs the most stubborn of spring bars on the backside of metal bracelets and makes removal easy and reliable. The pin tip is for pushing out open-lug spring bars and press fit bracelet pins.

FB-504
$24.95
 

You might never use another screw back case opener after you try one of the special balls to open screw back cases! Just hold the watch on one hand and the ScrewBall in the other hand. Press the ScrewBall against case back and start screwing the back off. When using the ScrewBall case opener you no-longer have to buy a case vise, which also saves you even more money!

OFREI-PINK-CASEBALL

 

Quantity	1 - 11	12 - 47	48 - 95	96+
Price	$8.95	$8.50	$8.05	$7.60

Side cutting pliers with tungsten carbide jaws for cutting watch stems.TD>

PLR-78100
$26.95
 

Made by Bergeon under the request of Rolex®, who were concerned that the metal ring of the old cushion could somehow scratch the case.

5394P
$19.95
 

This assortment of first-quality pin vises is a must for any serious watchmaker who can afford them. These often-used tools are beautifully machined and finished. Each handle except the smallest size is provided with two different bits, one in use, the other in the back of the handle. This is another one of those indispensables.

FB-762
$173.00
 

This Bergeon Swiss-made pinvise set includes four handles, each of which carries two bits (one in the back end of the handle). The pin vise is a basic and essential tool for the watchmaker, and this is a very decent set at a decent price. Constructed of nickel-plated brass, this set is bettered only by Bergeon's first-quality set, FB-762.

FB-717
$73.00
 

FB-742
$24.20
 

This Bergeon pin vise uses a slide lock for the steel jaws. The body of the tool is nickel-plated brass. The opening is 0.0 to 1.5 millimeter. Sometimes the conventional pinvise with rotating collar is difficult to use in one-handed operation. The sliding-lock design of this tool is the perfect, sometimes indispensable, solution. I have one and use it a lot.

FB-763
$14.80
 

This is a new type of timegrapher with high accuracy used to analyze and regulate mechanical watches. Why spend two to three times as much for a top of the line timegrapher machine, when this MTG3000 will do the job just fine with a Monochrome Display. Now you can test the Rate, Beat Error and Amplitude as required by Leading Watch Companies. There are two display usages: horizontal and vertical. 6 frequencies (18000, 19800, 21600, 25200, 28800, 36000) of mechanical watches made in everywhere can be tested. The power supply is single phase AC110V-220V(+/-5%). Frequency can be self-identified by this apparatus, it also can be fixed manually. 9 test-azimuth can be used. Daily rate (+/-300 s/d), allowable tolerance (+/-1 s/d). Amplitude: 100 - 350 degree, allowable tolerance (+/-3 degree). Beat error: 0-4.0ms, allowable tolerance (+/-0.1ms). Life angle: 30-60 degree, ex-works value: 52 degree. While testing using the TYMC tester, you can hear the sound of the beat noise from a built in speaker, you can turn the sound off by pushing the "sound" button.

MTG-3000
$1,098.00
 

TYMC Watch Tester MTG-3000, Bergeon Pin Vise # 5860, Bergeon Hand Setting Tool 7404-2, Bergeon #6 Presto Hand Remover, Bergeon #1 Presto Hand Remover, First-Quality Spring Bar Tool, Pink ScrewBall Case Opener, Euro Tool Stem Cutting Plier, New Bergeon Case Cushion With Plastic Ring, 2 Swiss Made 18 mm Spring Bars, 1 Leather Strap.

TZWS-OPTION-SUPERKIT1
$1120.00