Screwdrivers

This weighted, rotating carousel provides spare blades under the center cover. Unlike the FB-1200 this set provides nine drivers, omitting the 3.00 millimeter driver. This is an excellent buy on the best screw drivers made. The set contains 0.50, 0.60, 0.80, 1.0, 1.2, 1.4, 1.6, 2.0 and 2.5 mm size screwdrivers.

FB-1201
$84.95
 

These are the finest French made precision Screwdrivers. Set of 9 polished chromed brass screwdrivers with color coded rotating hexagon heads mounted on ball bearings(Base also rotates). Range in size from .60mm to 3.0mm, 19 spare blades and 2 fixing screws are located under the cap. The set contains 0.60, 0.80, 1.0, 1.2, 1.4, 1.6, 2.0, 2.5 and 3.0 mm size screwdrivers.

AF18980
$67.80
 

The heavily weighted, almost 2 pound rotating stand holds ten screw drivers from 0.50 to 3.0 millimeters. It will not be knocked over each time you fail to look up when reaching for a screw driver. Spare blades are supplied in the color-coded plastic tubes in front of each driver. This is a delightful tool and recommended for anyone who wants the best holder for the fundamental watchmaker's tool. The drivers and blades are the same supplied in all Bergeon driver sets, and you can save some money with the more modest FB-1201. The set contains 0.50, 0.60, 0.80, 1.0, 1.2, 1.4, 1.6, 2.0, 2.5 and 3.0 mm size screwdrivers.

FB-1200
$208.60
 

This elegant set provides nine Bergeon drivers (excluding only the 3.00 millimeter) and spare blades in color-coded tubes. This is not too handy on the bench because of the amount of surface it takes up, but wonderful for travelling or those who must put tools away when not working. The set contains 0.50, 0.60, 0.80, 1.0, 1.2, 1.4, 1.6, 2.0 and 2.5 mm size screwdrivers.

FB-1203
$119.00
 

This spring-loaded holder rolls on an Arkansas stone for perfect alignment and control in re-tipping a screw driver. This is a useful item for any watchmaker.

FB-1204
$26.95
 

On a scale from 1 to 10, these would rate a 5 or 6, when the Bergeon are a 10 and the French ones are a solid 9 on points scale. These French made screwdrivers have reversible blades, so when you break one you can turn them around and use the other end. Sizes 0.50 mm, 0.60 mm, 0.70 mm, 0.80 mm, 1.00 mm, 1.20 mm, and 1.30 mm to handle the smallest screw head sizes.

FB-1215
$33.95
 

Color coded tube with four .50 Millimeter Bergeon Screwdriver Blades.

FB-1220
$5.40
 

Color coded tube with four .80 Millimeter Bergeon Screwdriver Blades.

FB-1224
$5.40
 

Color coded tube with three 1.60 Millimeter Bergeon Screwdriver Blades.

FB-1232
$4.98
 

This box includes the 0.50, 0.60, and 0.80 drivers, with spare blades in color-coded plastic tubes. These are the three smallest drivers made.

FB-1202
$61.50
 

It takes a special sharpener to sharpen the perfect shape screwdriver blade. If you are working on high grade watches you might want to consider one of these. The special bits can hold 10 different screwdriver allowing the blade in correct alignment against the rounded stone.. Tool comes with 3 stones that can be replaced when worn. Two of the stones are round part number MSA01.502-A and one square stone number part number MSA01.502-B

FB-MSA01502
$369.00
 

These Screwdrivers which are made in France are very well made. Not quite as nice as the Bergeon made ones, however these are still very high quality. Set of five sizes: .60, .80, 1.0, 1.20, 1.40 mm. The only problem with this set is it only have the small size range of screwdrivers and a need for a larger blade will appear at the wrong time. If all you need are the sizes 1.40 and below this makes a nice set.

FB-1240
$26.50