Bench-top Accessories

The translucent (finest grade) Arkansas stone is indispensable to the watchmaker for all kinds of cutting and shaping tasks. This 3” x 1” x 1/2” stone is top quality and of extra fine grade. As with all stones, this should be used with honing oil and cleaned after use. At only one inch wide this stone cannot be used with the Bergeon screw driver holder for sharpening screwdriver blades.

FB-112
$27.20
 

This useful gauge measures the stem tap, crown tap, crown diameter, crown opening, case tube, and strap lug width. A very handy tool for matching crown, stem, and tube.

FB-115
$47.80
 

This handy gauge allows you slip a hand on a pin of the gauge. The hand drops to the index indicating it's size. Hole sizes .30 to 2.0 mm. Swiss made.

FB-100
$42.50
 

The balance tack holds the balance cock with balance attached. The screw hole in the cock is simply slipped over the pin.

FB-105
$15.25
 

The Etic, Swiss-made, instantaneous (capacitance) demagnetizer is relatively powerful and compact. Use it to demagnetize watch parts, and tools. This unit may require a few operations to completely demagnetize larger tools or parts. If you can spend a little more, look at # 119 for a more powerful demagnetizer. Use it to demagnetize samll parts and tweezers. You may need to push the button and rotate the item a few times. Always unplug and disconnect the unit from the main power supply, when not in use.

FB-118
$52.95
 

This instantaneous demagnetizer works completely on tools, watches, and watch hole in the front allows the insertion of tweezers, screw drivers, and other long, thin tools. I use one constantly, parts instantaneously with the push of the buttom. The and routinely demagnetize a watch when I put it on in the morning. Can't hurt, right? This capacitance unit won't overheat like coil units and is much more convenient to use. Back In Production! Now available and ready to ship. Thank you, Otto Frei & TZToolShop

FB-119
$209.00
 

This self-adhesive, rubberized mat reduces glare, discourages parts bounce and roll, and protects delicate parts that are placed or dropped on the mat. Every watchmaker should at least try one!

FB-116
$39.50
 

This self-adhesive, rubberized mat reduces glare, discourages parts bounce and roll, and protects delicate parts that are placed or dropped on the mat. Exactly the same bench mat as the Bergeon Bench Mat, except that there is no logo.

MSA 24.200
$29.60
 

Like the Bergeon mat, except a little bit more green and without the self-adhesive back.

AF Bench Pad
$15.95
 

Has a deeper shade of green and slightly thicker than the other bench mats.

MSA 24.203
$11.80
 

This nicely-made, nicle-plated brass balance holder is 35 millimeters in diameter. Both the tapered slot and perimeter holes may be used to hold the balance assembly and the spring stud.

FB-130
37.50
 

These very handy trays keep groups of parts together so you get the right screw back into the right bridge. The large circular compartment holds the ebauche. These are indispensable.

FB-104
$9.95
 

This carefully made riveting stake has 15 holes from 2.0 mm diameter to 8.60 millimeters and four cuts.

FB-2825
$89.90
 

Bergeon Crown Winder for Mechanical Watches number 30409A, for 3-5 mm crowns. Great for people who can no longer wind crowns without some discomfort.

FB-2880
$32.50
 

This inexpensive plastic dust cover and tray may look like a cheese tray, but for the watchmaker, it means clean parts. The segmented bottom separates groups of parts.

FB-117
$5.45
 

This spring-loaded holder rolls on an Arkansas stone for perfect alignment and control in re-tipping a screw driver. This is a useful item for any watchmaker.

FB-1204
$26.95
 

For those who don't want to scratch and damage their dials while removing hands, this Bergeon dial protector is the tool to use. It's made of resistant synthetic material. Thickness of 0.15 mm. Color is gray.

BERG-6938
$1.50

 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00